Flexible Aerogel Industrial Insulation for Cryogenic and Sub-Ambient Applications
Cryogel® Z is a top choice in cryogenic insulation because it offers protection against cold splash, jet fire, as well as acoustic attenuation in an ultrathin and lightweight package. Unlike traditional cryogenic insulation, Cryogel Z aerogel insulation is easy to install and can be used throughout a facility due to its flexible blanket format and does not require costly and time-consuming expansion and contraction joints. The cryogenic insulation blanket makes it ideal for installation while a process is in operation. Available in two thicknesses, Cryogel Z incorporates an integral vapor barrier with zero water vapor permeance to ensure maximum asset protection.
Most of the largest petrochemical facilities in the world entrust Cryogel Z insulation to protect their assets and ensure smooth operations. Cryogel Z has also been specified in nearly 70 major LNG liquefaction and regasification projects.
Cryogel Z Benefits
Product Documentation
Make your selections below to search for a document:
| document |
|---|
Resources
-
3 Reasons Why Cryogel is the Winning Cryogenic Insulation Solution
Cryogenic insulation is considered an artform, but Cryogel decreases the learning curve by installing like a hot insulation. Boost your team’s efficiency.
→Learn More -
6 Time-Savings Advantages of Cryogel & Pyrogel
Insulation is often the last thing standing between you and getting the unit back online. Imagine having the ability to make up lost time during the insulation phase.
→Learn More -
Cryogel Z Specification Guideline
This guide outlines how to use Cryogel Z for cold or low temperature thermal applications, acoustical treatment and/or passive fire protection.
→Learn More -
Cold Acoustics Design Calculator
Our Excel-based, plug-and-play calculator helps simplify the cold acoustics design process.
→Learn More
Installation Support for Cryogel Z Cold Service Pipe Insulation
Whether installing on pipes or vessels, Cryogel Z has a much shorter learning curve than rigid cryogenic insulation. It is ideal for any apprentice or journeyman who is looking to add another skill to their toolbox.
Our Technical Services team is available to travel anywhere in the world for hands-on training. Virtual training programs are also available. To learn more about our contractor training or for help writing specifications, please contact Technical Services.
CASE STUDY: Online Insulation with Cryogel® Z
Surging demand for gas and rising energy costs meant there was no feasible shutdown window to complete critical insulation repairs. Watch this case study to learn how Cryogel Z helped a propane facility stay operational while cryogenic insulation upgrades were made – enabling zero disruption to the refinery’s production.
Learn how Cryogel Z reversed a 2-month delay and enabled a facility to meet a first gas out milestone
Cryogel Z for Cryogenic Distillation Units
Watch the animation to learn how Cryogel Z can help cryogenic distillation units improve yields, reduce downtime, and conserve energy.
- Reduce icing
- Stabilize feed temperatures
- Minimize heat gain & energy loss
- Reduce loss of HVC into lower value streams
- Simplify inspection & repair with reusable Cryogel Z
Thermal Conductivity
| Mean Temperature (°F/°C) | k BTU-in/hr-ft2-°F / mWm-K |
|---|---|
| -200 / -129 | 0.096 / 14 |
| -100 / -73.3 | 0.10 / 15 |
| 0 / -17.8 | 0.11 / 16 |
| 75 / 23.9 | 0.12 / 17 |
| 100 / 37.8 | 0.12 / 17 |
| 200 / 93.3 | 0.13 / 19 |
Physical Properties
| Thickness* | 0.2 in (5 mm) & 0.4 in (10 mm) |
|---|---|
| Width Tolerance | 56-60 in (1422 – 1524 mm) |
| Max Use Temperature | 257°F (125°C) |
| Color | White |
| Density* | 10 lb/ft3 (0.16 g/cc) |
| Hydrophobic | Yes |
Performance Properties of Cryogel Z
| Test Procedure | Property | Results |
|---|---|---|
| ASTM C165 | Compressive Resistance | ≥ 5 psi (34.5 kPa) @ 10% deformation |
| ASTM C356 | Liner Shrinkage Under Soaking Heat | < 2% |
| ASTM C795 | Insulation for Use Over Austenitic Stainless Steel | Pass |
| ASTM C1101/1101M | Flexibility of Blanket Insulation | Flexible |
| ASTM C1104/1104M | Water Vapor Sorption | ≤ 5% (by weight) |
| ASTM C1338 | Fungal Resistance of Insulation Materials | No Growth |
| ASTM C1617 | Corrosiveness to Steel | Pass |
| ASTM C1763 | Water Absorption by Immersion | Pass |
| ASTM E84 | Surface Burning Characteristics | Flame Spread Index ≤ 25 Smoke Developed Index ≤ 50 |
| UL-1709 | Rapid Rise Fire Tests of Protection Materials for Structural Steel | Up to 120 mins of protection |
| ISO-22899-1 | Determination of the resistance to jet fires of passive fire protection materials | Up to 120 mins of protection |
| ISO-20088-3 | Cold Splash (Part 3: Jet Release) | Up to 60 mins of protection |
| ISO-15665 | Acoustic Insulation for Pipes, Valves, and Flanges | Configurations meeting Class A2, B2, C2/3, and D2/3. |
| IMO Part 2 & 5 | Effective July 2019, use only Cryogel Z (IMO grade) for applications requiring compliance with IMO Part 2 & 5. | Standard grade Cryogel Z is only appropriate for applications that do not require compliance with IMO Part 2 & 5. |
Performance of Vapor Retarder
| Test Procedure | Property | Results |
|---|---|---|
| ASTM E96 – Dry Cup | Water Vapor Transmission | ≤ 0.00 Perms |
