 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Use this guide to find the right product for your application. Please fill out our online request form for more detailed product and applications information. |
Product
|
Thickness* | Thermal Conductivity† |
Density* | Maximum Use Temperature |
Applications |
Product Data Sheet |
MSDS |
||||
| mm | in | mW/ m-K |
Btu-in/ hr-ft2-°F |
g/cc | lb/ft3 | C | F | ||||
Cryogel® Z
|
5.0 10.0 |
0.20 0.40 |
15.0 | 0.104 | 0.13 | 8.0 | 125° | 257° | Sub-ambient and cryogenic pipelines, vessels, and equipment |
||
Cryogel® x201
|
5.0 10.0 |
0.20 0.40 |
15.0 | 0.104 | 0.13 | 8.0 | 200° | 390° | Original equipment manufacturer (OEM) and fabricator applications |
English | |
Pyrogel® 2250
|
2.0 | 0.08 | 15.5 | 0.107 | 0.17 | 10.7 | 200° | 390° | Original equipment manufacturer (OEM) and fabricator applications |
||
Spaceloft®
|
5.0 10.0 |
0.20 0.40 |
14.0 | 0.101 | 0.15 | 9.4 | 200° | 390° | Interior/exterior walls, floors, and roofs in commercial, residential, institutional, and modular buildings |
||
Spaceloft® Subsea
|
5.0 10.0 |
0.20 0.40 |
13.9 | 0.096 | 0.16 | 10.0 | 200° | 390° | Thermal insulation for pipe in pipe (PIP) applications in the major offshore sectors |
||
Pyrogel® 6650
|
6.0 | 0.24 | 0.11 | 7.0 | 650° | 1200° | Original equipment manufacturer (OEM) and fabricator applications |
English | |||
Pyrogel® XT
|
5.0 10.0 |
0.20 0.40 |
21.0 | 0.146 | 0.18 | 11.0 | 650° | 1200° | Medium-to-high pressure steam pipes, vessels and equipment; aerospace & defense applications; fire barriers; welding blankets |
||
Pyrogel® XTF
(Fire Protection) |
10.0 | 0.40 | 21.0 | 0.146 | 0.18 | 11.0 | 650° | 1200° | Medium-to-high pressure steam pipes, vessels and equipment; aerospace & defense applications; fire barriers; welding blankets |
||
| * Nominal values † Thermal conductivity values taken at 100°F (37.5°C) at a compressive load of 2 psi |
||
Information presented herein is typical and representative of material performance. Any and all warranties, either expressed or implied, are disclaimed. All products or materials supplied, including any recommendations or suggestions must be evaluated by the user to determine applicability and suitability for a particular use. Values should not be used directly for specification purposes. Aspen Aerogels, Inc. does not assume any liability for use or misuse of any products produced or supplied. Surface coated materials are available upon request. |
||
 |
 |
 |